Skip to main content

How to Set Up and Use the PO Approval Flow

PO Approval Flow adds a review step before a purchase order is sent to the supplier. It’s a good fit if managers or technicians create POs and you want someone else to give the final OK.

Who this is for: Admins and Owners (setup and approvals), Managers (creating POs and sending them for review).


➡️ How it works

When PO Approval Flow is ON:

  • A manager creates a PO and sends it for review instead of sending it to the supplier.

  • Admins and Owners get notified and can approve or decline it.

  • Only after approval does the PO go out to the supplier.

Only Admin and Owner roles can approve or decline. Managers can create a PO and send it for review, but they can’t approve it.


➡️ Step 1: Turn on PO Approval Flow

  1. Go to Settings → Procurement → Purchasing → Purchasing Settings.

2. Turn PO Approval Flow ON.

3. Click Save.

💡 Only POs created after you turn this on are affected. POs that were already sent won’t change.


➡️ Step 2: Choose who approves

  1. Go to Settings → Procurement → Purchasing → PO Approvers.

    Option A: Default (all Owners and Admins)

    No setup needed. Every PO submitted for approval notifies all active Owners and Admins, and any one of them can approve it.

    Option B: Fixed approvers

    Use this when the same people should approve every purchase order.

    1. Select Fixed approvers.

    2. Under Users, pick the people who should approve POs.

    3. Under Permission groups, pick any groups whose members should approve POs.

    4. Click Save.

    Option C: By order amount

    Use this when different approvers should review POs depending on the order value. For example, one person for smaller orders and someone more senior for larger ones.

    1. Select By order amount.

    2. Click Add tier.

    3. Enter the Minimum amount for the tier.

    4. Enter the Maximum amount (not included). Leave it empty on your highest tier to cover every larger order.

    5. Under Users and Permission groups, pick who approves orders in that range.

    6. Repeat with Add tier for each additional range. Use the trash icon to remove a tier.

    7. Click Save.

    How the ranges work: each tier covers orders from its minimum up to, but not including, its maximum. With tiers of $0 to $5,000 and $5,000 to $30,000, an order of $4,999.99 goes to the first tier and an order of exactly $5,000 goes to the second.

    ⚠️ Orders that don’t fall in any tier are sent without approval. For example, if your first tier starts at $1,000, POs from $0 up to $1,000 skip approval. If you want every PO reviewed, start your first tier at $0.


➡️ Step 3: Create a PO and submit it for approval

  1. Go to Purchasing → Purchase Orders and create a PO. See How to Create a Purchase Order for all the ways to build one.

  2. Make sure the PO has a due date. You can’t submit it without one.

  3. Open the PO (it starts as Draft) and click Actions in the top right.

  4. Under Next step, click Submit for approval.

  5. The PO moves to the Waiting for approval column on the Purchase Orders board. It won’t go to the supplier until it’s approved.

⚠️ If you see “Please set due date before changing the purchase order status,” add a due date to the PO and try again.


➡️ Step 4: Approve or decline the PO

Approvers can review a PO that’s waiting for approval right from the PO itself.

  1. Go to Purchasing → Purchase Orders and open the PO from the Waiting for approval column.

  2. Review the details. The status next to the PO number says Waiting For Approval.

  3. Click Actions in the top right. Under Next step, you’ll see “This PO is waiting for your approval.”

  4. Click Accept PO to approve it, or Decline PO to stop it.

⚠️ Only the people set up as approvers see these buttons. The person who submitted the PO can’t approve it.


➡️ Best practices

✅ Turn on PO Approval Flow before giving technicians PO creation access. It’s easier to start with review required and loosen it later than to find out unreviewed POs went to suppliers.

✅ Start with Default approvers. Move to Fixed approvers or By order amount once you know who should be signing off.

✅ Keep at least two people who can approve. Since submitters can’t approve their own POs, someone else always needs to be available.

✅ With order-amount tiers, avoid gaps. Start your first tier at $0 and leave the maximum empty on the last tier. Any order that doesn’t match a tier is sent without approval.

✅ Add the Required by date when you create the PO. You can’t submit a PO for approval without it, so filling it in upfront saves a step.

✅ Check the Waiting for approval column regularly. POs stay there until an approver accepts or declines them, and nothing goes to the supplier in the meantime.


➡️ Common issues & fixes

“I turned on approvals, but a PO still went out without review.”
Check that PO Approval Flow is saved as ON in Purchasing Settings, and that the PO was created after you turned it on. POs that were already sent aren’t affected.

“Some POs go out without approval even though I set up tiers.”
Check for gaps. Orders that don’t match any tier are sent without approval. Start your first tier at $0 and leave the maximum empty on the last one so every order is covered.

“I click Submit for approval and nothing happens.”
Look for the message “Please set due date before changing the purchase order status.” Add a Required by date to the PO (under Shipping & Delivery) and submit it again.

“I set up approvers, but nothing changed.”
Look for the orange banner on the PO Approvers tab. If it says the PO Approval Flow is turned off, turn it on in Purchasing Settings. Your approvers are saved, but they only apply once the flow is on.

“I’m an Owner and I can’t approve my own PO.”
That’s expected. The person who submits a PO can’t approve it, even as an Owner or Admin. Another approver needs to accept it.

“I don’t see the Accept PO and Decline PO buttons.”
Open the PO, click Actions, and look under Next step. The buttons only show up when the PO is in Waiting For Approval and you’re one of its approvers. Check the PO Approvers tab to confirm you’re listed (as a user or through a permission group). If you submitted the PO yourself, you won’t see them either.

“Where is my PO after I submit it?”
It moves to the Waiting for approval column on the Purchase Orders board and stays there until someone accepts or declines it.

“I accepted the PO. Do I still need to send it to the supplier?”
No. After you click Accept PO, you’ll see “Purchase order was successfully approved and sent to the supplier.” It goes out automatically.


Still have doubts?

Did this answer your question?